Project Updates
All the latest news, updates and information from our project partners.
Guidelines for the creation of a sensor model simulation handbook
As part of the project, the consortium worked on the validation of sensor models and produced a set of guidelines ...
Sim4CAMSens project final report
The Sim4CAMSens 1 project reached its conclusion in June 2025 and this report attempts to summarise the huge and diverse ...
Roadmaps and Standards Landscape of Perception Sensors and Simulation
This report provides a comprehensive overview of the current and emerging landscape of automotive perception sensors and the standards that ...
Recommendations report on UK Perception Sensors
This report provides a comprehensive overview of the UK’s current capabilities, challenges, and opportunities in the field of automotive perception ...
LiDAR noise factor testing
This report systematically examines the effects of environmental noise factors, specifically LiDAR occlusion with clear and muddy water droplets, through ...
Report on noise factor analysis
This report provides a review of existing automotive sensor testing methods and standards from the literature. More specifically, testing standards ...
CAV Catalogue – a comprehensive online listing for automated vehicles
The unique CAV Catalogue, has recently been updated, now offering a more comprehensive global directory of all L4 Automated Vehicles ...
Evaluating the impact of temperature and ice accumulation for lidar
Following on from last weeks post on Evaluating the impact of temperature and ice accumulation for radar, we will now ...
Evaluating the impact of temperature and ice accumulation for radar
During our first winter testing campaign (January to March 2024), we noticed some uncertainties in the results, which we suspected ...
Claytex will exhibit at the AutoSens Europe 2024
Claytex will exhibit at the AutoSens Europe 2024, where the AutoSens community will untie at the Palau de Congressos in ...
Claytex will take the stage at the Cenex Expo 2024
Claytex will exhibit and present at the Cenex Expo 2024 this September, taking place at the Millbrook Proving Ground. Cenex Expo sets an ...
The Effect of Snow on LiDAR Performance
Introduction To navigate our surroundings – whilst in a vehicle or otherwise – we use our senses to perceive the ...
Syselek attended and presented on behalf of the Sim4CAMSens consortium at the EUCAD
The EUCAD Symposium 2024 was the third face-to-face symposium of European Connected and Automated Driving research, organised by the CCAM ...
Claytex will take the stage at ADAS & Autonomous Vehicle Technology Expo
Claytex will exhibit and present at the ADAS & Autonomous Vehicle Technology Expo this June in Stuttgart, Germany. ADAS & Autonomous ...
Presenting Winter Testing Campaign Findings at AutoSens USA 2024
Claytex is set to participate and present at AutoSens USA 2024, the premier gathering for ADAS and AV specialists driving ...
First data from the winter test site
The test site experienced its first snowy conditions early in January, as can be seen in Figure 1, which is ...
Perception sensors under test
When developing the winter test programme, a key consideration was to make sure that we could capture data from a ...
Design of the test range and targets
When designing the test range we had to consider a number of factors that influenced the selection of the location, ...
Weather measurements for the winter test campaign
When designing the Sim4CAMSens Winter testing campaign, as with any real world test work, one of the key concerns ...
Why are we testing perception sensors in winter conditions
Adverse weather conditions such as rain, snow, fog, and hail can greatly impair AV sensors' performance. For example, raindrops ...
Introducing the Sim4CAMSens project
In a rapidly evolving automotive landscape, the promise of autonomous vehicles (AVs) heralds a new era of mobility characterised ...